Skip to content

Methods and Steps of Research

UGC NET Paper 1: experimental, descriptive, historical, qualitative and quantitative methods, steps of research, hypotheses, sampling and validity.

  • 17 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: One Question, Four Methods
  3. 1. Variables: the Vocabulary of Methods
  4. 2. The Experimental Method
  5. 3. The Descriptive Method
  6. 4. The Historical Method
  7. 5. Quantitative and Qualitative Methods
  8. 6. Steps of Research
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: One Question, Four Methods


1. Variables: the Vocabulary of Methods

VariableRoleExample (effect of a new teaching method on scores)
Independent (IV)The presumed cause; manipulated or selected by the researcherTeaching method
Dependent (DV)The presumed effect; measuredTest scores
ExtraneousAny other variable that may affect the DV and must be controlledPrior ability, teacher’s experience
ConfoundingAn extraneous variable that varies with the IV, so its effect cannot be separatedBetter teacher assigned only to the new method
Intervening (mediating)Links IV to DV; inferred, not directly observedStudent motivation
ModeratorChanges the strength or direction of the IV–DV relationshipGender, type of college

2. The Experimental Method

An experiment is the only method that can establish cause and effect with confidence. It has three defining features:

  1. Manipulation — the researcher deliberately changes the independent variable.
  2. Control — extraneous variables are held constant, and a control group that does not receive the treatment is compared with the experimental group.
  3. Randomisation — subjects are randomly assigned to groups, so that groups are equivalent at the start.

The logic of comparing a group that gets the treatment with one that does not goes back to J.S. Mill’s methods of agreement and difference (A System of Logic, 1843). Randomisation as the basis of experimental design was set out by the statistician R.A. Fisher in The Design of Experiments (1935).

Types of experimental design

Donald Campbell and Julian Stanley’s Experimental and Quasi-Experimental Designs for Research (1963) gave the classification still used in textbooks:

CategoryRandom assignment?Control group?Examples
Pre-experimentalNoAbsent or not equivalentOne-shot case study; one-group pretest–posttest; static-group comparison
True experimentalYesYesPretest–posttest control group; posttest-only control group; Solomon four-group
Quasi-experimentalNo (intact groups such as existing classes)UsuallyNon-equivalent control group; time-series design

The Solomon four-group design uses four groups (two with pretest, two without; in each pair one gets the treatment) so the researcher can see whether taking the pretest itself affected the result.

Validity of an experiment

ValidityQuestionStrengthened by
Internal validityDid the IV really cause the change in the DV?Random assignment, control group, holding conditions constant
External validityCan the result be generalised to other people, places and times?Random sampling from the population, realistic (field) settings

Campbell and Stanley’s threats to internal validity include history (outside events during the study), maturation (natural change in subjects), testing (effect of the pretest), instrumentation (changes in the measuring tool), statistical regression (extreme scorers drifting towards the mean), selection (non-equivalent groups) and experimental mortality (dropouts).

Effects that distort experiments

EffectWhat happens
Hawthorne effectSubjects change behaviour because they know they are being studied (named after the Western Electric Hawthorne Works studies of the 1920s–1930s)
John Henry effectThe control group works harder to compete with the experimental group
Pygmalion effectHigher expectations from the teacher lead to better performance (Rosenthal and Jacobson, Pygmalion in the Classroom, 1968)
Placebo effectImprovement because subjects believe they are receiving a treatment

3. The Descriptive Method

Descriptive research describes “what is”: the present status of a phenomenon. The researcher does not manipulate any variable.

TypeWhat it doesExample
SurveyCollects data from a large sample by questionnaire, schedule or interviewSurvey of hostel facilities in state universities
Case studyIntensive, in-depth study of one unit: a person, family, institution or communityStudy of one autonomous college’s governance
CorrelationalMeasures the degree of relationship between two or more variables (coefficient from −1 to +1)Relation between library use and grades
DevelopmentalStudies change with age or time: longitudinal (same group followed) or cross-sectional (different age groups at one time)Language development from age 3 to 10
Ex post facto (causal-comparative)Studies possible causes after the effect has occurred, by comparing groups that already differ; the IV cannot be manipulatedComparing achievement of children from single-parent and two-parent homes
ObservationalRecords behaviour as it occurs: participant or non-participant, structured or unstructuredClassroom interaction study

Questionnaire, schedule and interview

ToolWho fills itStrengthWeakness
QuestionnaireThe respondent, often by post or onlineCheap, covers large and scattered samplesNeeds literate respondents; low response rate
ScheduleThe enumerator, who asks the questions and records answersWorks with non-literate respondents; higher responseCostly; enumerator bias
InterviewFace-to-face or by phone; structured, semi-structured or unstructuredDepth, clarification possibleTime-consuming; interviewer effect

Other tools you should recognise: rating scales, the Likert scale (Rensis Likert, 1932; agreement on a five-point scale), checklists, sociometry (Jacob L. Moreno; mapping choices within a group as a sociogram) and the Delphi technique (rounds of anonymous expert opinion until consensus).


4. The Historical Method

Historical research studies past events to understand the present and anticipate the future. Its data are records, not experiments.

Sources

SourceMeaningExamples
PrimaryCreated at the time by participants or eyewitnessesOriginal documents, letters, diaries, minutes, official records, inscriptions, artefacts
SecondaryAccounts written later by someone who was not a witness, using primary sourcesTextbooks, histories, encyclopaedias, reviews

Historical criticism

Every source is tested twice, and in this order:

  1. External criticism — Is the document genuine? Checks authenticity: authorship, date, place, material, handwriting, signs of forgery or later insertion.
  2. Internal criticism — Is the content credible and accurate? Checks the meaning of the statements, the author’s competence, bias and motive, and consistency with other sources.

Limitations: incomplete records, the researcher cannot observe events directly, and sources reflect the bias of those who wrote and preserved them.


5. Quantitative and Qualitative Methods

BasisQuantitativeQualitative
PhilosophyPositivism / post-positivismInterpretivism, constructivism, phenomenology
AimMeasure, test hypotheses, generalise, predictUnderstand meanings, experiences, context
ReasoningMainly deductiveMainly inductive
DataNumbersWords, images, observations
SampleLarge, often randomSmall, purposive; until saturation
ResearcherDetached; uses standardised instrumentsThe researcher is the main instrument
DesignFixed in advanceEmergent, flexible
ToolsTests, structured questionnaires, scalesIn-depth interviews, participant observation, focus groups, documents
AnalysisStatisticsCoding, themes, interpretation
Quality criteriaReliability, validity, generalisabilityTrustworthiness: credibility, transferability, dependability, confirmability (Lincoln and Guba, Naturalistic Inquiry, 1985)

Main qualitative traditions

TraditionFocusName to know
EthnographyCulture of a group, through long participant observationBronisław Malinowski’s fieldwork in the Trobriand Islands (Argonauts of the Western Pacific, 1922)
PhenomenologyEssence of a lived experienceEdmund Husserl
Grounded theoryBuilding theory from the data, not testing a prior theoryBarney Glaser and Anselm Strauss, The Discovery of Grounded Theory (1967)
Case studyIn-depth study of a bounded case—
NarrativeLife stories and how people tell them—

Thick description, a term Clifford Geertz used in The Interpretation of Cultures (1973) after Gilbert Ryle, means describing behaviour together with its context and meaning, so an outsider can understand it.

Mixed methods and triangulation

Mixed-methods research combines quantitative and qualitative data in one study. Triangulation means checking a finding through more than one angle. Norman Denzin distinguished four kinds: data triangulation (different sources), investigator triangulation (different researchers), theory triangulation (different theoretical lenses) and methodological triangulation (different methods).


6. Steps of Research

The sequence below is the one Indian textbooks follow, slightly condensed from the research process in C.R. Kothari’s Research Methodology (which also lists “execution of the project” between data collection and analysis). In an MCQ, the order matters.

graph TD
    A["1. Identify and formulate
the research problem"] --> B["2. Review of literature"] B --> C["3. Formulate hypotheses"] C --> D["4. Prepare research design"] D --> E["5. Determine sample design"] E --> F["6. Collect data"] F --> G["7. Analyse data"] G --> H["8. Test hypotheses"] H --> I["9. Interpret and generalise"] I --> J["10. Prepare the report"]

Step by step

StepWhat happensExam point
1. Research problemChoose a researchable, specific, significant and feasible questionA good problem is clear, limited in scope and answerable with data
2. Review of literatureStudy earlier workAvoids duplication, finds gaps, sharpens the problem, suggests hypotheses and methods; comes before the hypothesis
3. HypothesisA tentative, testable statement of the expected relationship between variablesMust be testable, specific, consistent with known facts, stated simply
4. Research designThe blueprint for collecting and analysing dataExploratory, descriptive, diagnostic or experimental
5. Sample designDecide the population, sampling frame, method and sizeSee sampling below
6. Data collectionUse tools such as tests, questionnaires, interviews, observationPilot study first to test the tools
7–8. Analysis and testingCode, tabulate, apply statistics; accept or reject hypothesesParametric vs non-parametric tests
9. InterpretationExplain findings, link to theory, state limitsGeneralise only as far as the sample allows
10. ReportWrite the thesis or articleSee topic 3

Hypotheses and errors

  • Null hypothesis (H₀): no relationship or no difference. It is the hypothesis that is statistically tested.
  • Alternative hypothesis (H₁): there is a relationship or difference.
  • Directional hypothesis states the direction (“girls score higher”); non-directional does not (“there is a difference”).
H₀ actually trueH₀ actually false
Reject H₀Type I error (probability α, the level of significance)Correct decision
Fail to reject H₀Correct decisionType II error (probability β)

A Type I error is a “false alarm”; a Type II error is a “missed effect”.

Sampling

Probability (every unit has a known, non-zero chance)Non-probability (chance of selection unknown)
Simple random — lottery or random numbersConvenience — whoever is easily available
Systematic — every kth unit after a random startPurposive (judgement) — chosen for a specific purpose or expertise
Stratified — divide into homogeneous strata, sample from eachQuota — fill fixed quotas by category, non-randomly
Cluster — randomly select whole groups (schools, villages)Snowball — each respondent refers others; for hidden or hard-to-reach populations
Multistage — clusters within clusters in stages

Levels of measurement

S.S. Stevens set out four levels in “On the Theory of Scales of Measurement” (Science, 1946):

LevelPropertyExample
NominalCategories onlyGender, religion, roll numbers
OrdinalOrder, unequal intervalsRanks, Likert responses (strictly)
IntervalEqual intervals, no true zeroTemperature in °C, IQ
RatioEqual intervals and a true zeroHeight, income, age

Mnemonic: NOIR.

Reliability and validity of tools

  • Reliability = consistency. Types: test–retest, parallel forms, split-half, inter-rater; internal consistency is often reported as Cronbach’s alpha.
  • Validity = measures what it claims to measure. Types: face, content, criterion-related (concurrent and predictive) and construct.
  • A tool can be reliable without being valid (a clock that is always five minutes fast), but it cannot be valid without being reliable.

Parametric and non-parametric tests

Parametric (assume normal distribution, interval or ratio data)Non-parametric (distribution-free; nominal or ordinal data)
t-test, z-test, ANOVA (F-test), Pearson’s rChi-square, Mann–Whitney U, Wilcoxon, Kruskal–Wallis, Spearman’s rank correlation

Memory Tricks

Don’t Confuse

ThisvsThat
Random sampling: how subjects are drawn from the population → external validityvsRandom assignment: how subjects are put into groups → internal validity
Experimental: researcher manipulates the IVvsEx post facto: IV already happened; no manipulation
True experiment: random assignmentvsQuasi-experiment: intact groups, no random assignment
External criticism: genuineness of the documentvsInternal criticism: credibility of its content
Primary source: eyewitness, contemporaryvsSecondary source: later account
Questionnaire: respondent fillsvsSchedule: enumerator fills
Longitudinal: same group over timevsCross-sectional: different groups at one time
Type I: reject a true H₀ (α)vsType II: retain a false H₀ (β)
Hawthorne: subjects know they are observedvsJohn Henry: control group competes harder

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. In a study of the effect of yoga on stress, which is the dependent variable?
  2. How many groups does the Solomon design use?
  3. Checking whether a manuscript is a forgery is part of ______ criticism.
Answers
  1. Stress (the measured outcome); yoga is the independent variable.
  2. Four (Solomon four-group design).
  3. External criticism.

Level 2: Exam-style MCQs

Q1. (Practice) A researcher compares the lung capacity of people who have smoked for twenty years with that of non-smokers, to study the effect of smoking. The method is:

  • (a) True experimental
  • (b) Ex post facto
  • (c) Action research
  • (d) Historical
Answer and explanation

(b) Ex post facto. The “treatment” (smoking) has already happened and cannot ethically be assigned; the researcher compares existing groups to infer causes after the fact.

Q2. (Practice) Which experimental design allows the researcher to check whether the pretest itself influenced the results?

  • (a) One-shot case study
  • (b) Static-group comparison
  • (c) Solomon four-group design
  • (d) Time-series design
Answer and explanation

(c). By including groups that receive no pretest, the Solomon design separates the effect of testing from the effect of the treatment.

Q3. (Practice) A study of the problems of migrant construction workers who have no fixed address finds respondents through earlier respondents. The sampling method is:

  • (a) Stratified random sampling
  • (b) Cluster sampling
  • (c) Systematic sampling
  • (d) Snowball sampling
Answer and explanation

(d) Snowball sampling, used when no sampling frame exists and members of a hidden population can lead the researcher to others.

Q4. (Practice) Consider the following statements about qualitative research:

  1. It is mainly inductive.
  2. The researcher is regarded as the main instrument of data collection.
  3. It requires large random samples to ensure generalisation.

Which of the statements given above is/are correct?

  • (a) 1 only
  • (b) 1 and 2 only
  • (c) 2 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 1 and 2 only. Qualitative research uses small, purposive samples and aims at depth and transferability, not statistical generalisation.

Q5. (Practice) Rejecting a null hypothesis that is in fact true is called:

  • (a) Type I error
  • (b) Type II error
  • (c) Sampling error
  • (d) Standard error
Answer and explanation

(a) Type I error, whose probability is the level of significance (α).

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): In historical research, external criticism is applied before internal criticism. Reason (R): The accuracy of a document’s content need not be judged until the document has been shown to be genuine.

Answer and explanation

(a). Establishing authenticity first is exactly why external criticism precedes internal criticism.

Q2. (Practice) Assertion (A): Random assignment of subjects to groups strengthens the internal validity of an experiment. Reason (R): Random assignment ensures that the sample represents the population.

Answer and explanation

(c). A is true: random assignment makes groups equivalent, so differences can be attributed to the treatment. R is false: representing the population is the job of random sampling, which concerns external validity.

Q3. (Practice) Match List I with List II.

List I (Sampling method)List II (Description)
A. StratifiedI. Whole groups such as schools are selected at random
B. ClusterII. Respondents identify further respondents
C. QuotaIII. Population divided into homogeneous strata, random selection from each
D. SnowballIV. Fixed numbers from each category chosen non-randomly
  • (1) A-III, B-I, C-IV, D-II
  • (2) A-I, B-III, C-IV, D-II
  • (3) A-III, B-I, C-II, D-IV
  • (4) A-IV, B-I, C-III, D-II
Answer and explanation

(1) A-III, B-I, C-IV, D-II. The stratified/quota pair is the trap: both use categories, but only stratified selects randomly within them.

Q4. (Practice) Arrange the following steps of research in the correct sequence:

  • A. Review of literature

  • B. Formulation of hypotheses

  • C. Identification of the research problem

  • D. Collection of data

  • E. Analysis and interpretation

  • (1) A, C, B, D, E

  • (2) C, A, B, D, E

  • (3) C, B, A, D, E

  • (4) C, A, D, B, E

Answer and explanation

(2) C, A, B, D, E. Problem → literature → hypotheses → data → analysis. The review of literature precedes the hypothesis.


Quick Revision Table

FactDetail
ExperimentManipulation, control, randomisation; only method for firm causal claims
Mill / FisherMethods of agreement and difference (1843) / The Design of Experiments (1935)
Campbell and Stanley (1963)Pre-experimental, true experimental, quasi-experimental
Solomon four-groupControls the effect of the pretest
Internal / external validityRandom assignment / random sampling
Hawthorne / John Henry / PygmalionBeing observed / control group competes / teacher expectation
DescriptiveSurvey, case study, correlational, developmental, ex post facto, observation
Ex post factoCauses studied after the effect; no manipulation
HistoricalPrimary vs secondary sources; external (genuine?) then internal (accurate?) criticism
QualitativeInductive, purposive sample, researcher as instrument, trustworthiness (Lincoln and Guba, 1985)
Grounded theoryGlaser and Strauss (1967)
Thick descriptionGeertz (1973)
TriangulationDenzin: data, investigator, theory, methodological
StepsProblem → literature → hypothesis → design → sample → data → analysis → testing → interpretation → report
ErrorsType I: reject true H₀ (α); Type II: retain false H₀ (β)
Probability samplingSimple random, systematic, stratified, cluster, multistage
Non-probabilityConvenience, purposive, quota, snowball
MeasurementStevens (1946): nominal, ordinal, interval, ratio (NOIR)

Key Takeaways

What’s Next