Skip to content

Graphical Representation and Mapping of Data

UGC NET Paper 1: bar charts, histograms, pie charts, table charts, line charts, ogives and thematic maps (choropleth, dot, isopleth), and how to choose one.

  • 17 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Same Numbers, Different Stories
  3. 1. Why and How to Present Data Visually
  4. 2. Table Chart
  5. 3. Bar Charts
  6. 4. Histograms, Frequency Polygons and Ogives
  7. 5. Pie Charts
  8. 6. Line Charts
  9. 7. Choosing the Right Chart
  10. 8. Mapping of Data
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Same Numbers, Different Stories


1. Why and How to Present Data Visually

Graphs and diagrams make large data sets easy to grasp, reveal patterns and comparisons at a glance, and are remembered longer than tables. They give approximate values, though, and they can mislead. Tables give exact values but are slower to read.

General rules of a good graph:

  1. A clear title (what, where, when) and a source note.
  2. A suitable scale, stated on each axis with units; the value axis of a bar chart should start at zero.
  3. A legend (key) when more than one series or colour is used.
  4. Neatness and simplicity: no unnecessary 3D effects, decoration or crowding.
  5. The independent variable (time, categories) on the horizontal (x) axis, the dependent variable (value) on the vertical (y) axis.

A short history

WhoWhatWhen
William PlayfairLine graph and bar chart of trade data, in The Commercial and Political Atlas1786
William PlayfairPie chart, in Statistical Breviary1801
John SnowDot map of cholera deaths around the Broad Street pump, London1854 outbreak (map published 1855)
Florence NightingalePolar area (“rose”) diagram of causes of soldiers’ deaths in the Crimean Warlate 1850s
Charles Joseph MinardFlow map of Napoleon’s 1812 Russian campaign1869

2. Table Chart

A table chart is data presented as a table of rows and columns, the most common DI format in UGC NET. The question gives you, say, the production of five companies over five years and asks for percentage changes, ratios and averages.

How to read a table chart fast:

  • Read the title, units and head note first (“figures in thousands”, “₹ crore”). Half the wrong answers come from ignoring units.
  • Look for totals: if a row or column total is not given and several questions need it, compute it once and write it down.
  • Note whether figures are absolute values or percentages. A table of percentages cannot tell you absolute values unless a total is given.

The parts of a statistical table (title, head note, captions, stubs, body, footnote, source) are covered in the previous topic.


3. Bar Charts

A bar chart (bar diagram) shows values as bars of equal width whose length (height) is proportional to the value. Gaps between bars are equal. Bars may be vertical (columns) or horizontal. Bar charts suit discrete or categorical data and comparisons across categories or years.

Types of bar chart

TypeWhat it showsExample
Simple barOne series, one bar per categoryEnrolment in five faculties
Multiple (grouped) barTwo or more series side by side for each categoryRevenue and expenditure in each year
Subdivided (component, stacked) barOne bar per category, divided into components; bar length = totalTotal enrolment per year, divided by faculty
Percentage barEvery bar = 100%, divided into component percentagesShare of each faculty in each year
Deviation barPositive and negative values above and below a zero lineProfit and loss, surplus and deficit

Here is a simple bar chart of the admissions data used in the solved sets later in this chapter (hypothetical university, all faculties combined):

xychart-beta
    title "Total admissions, hypothetical university, 2021-2025"
    x-axis [2021, 2022, 2023, 2024, 2025]
    y-axis "Students" 0 --> 2000
    bar [1500, 1600, 1700, 1800, 1950]
Year20212022202320242025
Admissions1,5001,6001,7001,8001,950

The bars rise by the same 100 students each year from 2021 to 2024, but the percentage increase falls (6.67%, then 6.25%, then 5.88%) because the base keeps growing. A bar chart shows absolute change directly; percentage change has to be calculated.


4. Histograms, Frequency Polygons and Ogives

Histogram

A histogram represents a frequency distribution of a continuous variable. Classes are marked on the x-axis and a rectangle is drawn on each class. The bars touch (no gaps), because the classes are continuous. The word “histogram” is generally credited to Karl Pearson.

The defining rule: the area of each rectangle is proportional to the frequency. When all classes have equal width, height can simply equal frequency. When widths are unequal, height must be the frequency density:

$$\text{Frequency density} = \frac{\text{frequency}}{\text{class width}}$$

Frequency polygon and frequency curve

A frequency polygon is drawn by joining the mid-points of the tops of the histogram’s rectangles (or by plotting frequencies against class marks) and closing the figure on the x-axis at the mid-points of the empty classes before the first and after the last class. The area under the polygon equals the area of the histogram. Smoothing the polygon gives a frequency curve (for example the bell-shaped normal curve). Polygons are better than histograms for comparing two distributions on one graph.

Ogive (cumulative frequency curve)

An ogive plots cumulative frequencies:

  • Less than ogive: cumulative frequencies plotted against upper class limits; it rises from left to right.
  • More than ogive: cumulative frequencies “more than” plotted against lower class limits; it falls from left to right.

The two ogives intersect at the median. On a single less-than ogive, the median is the value on the x-axis corresponding to \( \frac{N}{2} \) on the y-axis; quartiles are read the same way at \( \frac{N}{4} \) and \( \frac{3N}{4} \).


5. Pie Charts

A pie chart is a circle divided into sectors, each showing a component’s share of a whole. The whole circle is 360°, so:

$$\text{Central angle} = \frac{\text{component value}}{\text{total}} \times 360^\circ = \text{percentage} \times 3.6^\circ$$

and conversely, \( \text{percentage} = \frac{\text{angle}}{3.6} \).

pie showData
    title Spending of a hypothetical college (percent of ₹480 lakh)
    "Salaries" : 45
    "Laboratory" : 15
    "Maintenance" : 12
    "Library" : 10
    "Others" : 10
    "Scholarships" : 8
HeadPercentAngleAmount (₹ lakh)
Salaries45162°216
Laboratory1554°72
Maintenance1243.2°57.6
Library1036°48
Others1036°48
Scholarships828.8°38.4
Total100360°480

Benchmarks to memorise: 25% = 90° (a right angle), 50% = 180°, 10% = 36°, 1% = 3.6°, 5% = 18°, 20% = 72°.

When to use a pie chart: only for parts of a single whole, with few categories (ideally no more than five or six), when the shares, not the exact values, are the message. Pie charts are poor for comparing similar-sized slices and useless for trends over time.


6. Line Charts

A line chart (line graph) plots values as points joined by straight lines, usually against time on the x-axis. It is the natural choice for a time series: trends, peaks, troughs and turning points.

  • Single line: one series (India’s literacy rate across censuses).
  • Multiple lines: two or more series on one axis for comparison (revenue and expenditure).
  • Two y-axes: two series with different units (rainfall in mm and crop yield in tonnes); read each line against its own axis.

Three rules for reading a line chart:

  1. Steepness shows absolute change, not percentage change. The same rise from a higher base is a smaller percentage.
  2. A line of growth rates is not a line of values. If the chart plots “percentage growth over the previous year”, a falling line still means the value is rising, only more slowly, so long as the growth rate stays above zero. The value falls only when the plotted growth rate is negative. This is the commonest trap; it is worked through in Solving DI Sets.
  3. Check the baseline and scale as with bar charts.

Other forms you should recognise

FormUse
Scatter diagramPairs of values (x, y) as dots, to see the correlation between two variables
PictogramValues shown by repeated pictures (one figure = 1,000 people); easy for the public, imprecise
Box plot (box-and-whisker)Median, quartiles and range of a distribution
Radar (spider) chartSeveral variables for one item on axes radiating from a centre
Heat mapValues shown by colour intensity in a grid

7. Choosing the Right Chart

PurposeBest choiceAvoid
Compare values across categoriesBar chartLine chart (implies continuity)
Show parts of one wholePie chart or percentage barPie with many slices
Show a trend over timeLine chartPie chart
Show a frequency distribution of continuous dataHistogram, frequency polygonBar chart with gaps
Find median or “how many below x”OgivePie chart
Show relationship between two variablesScatter diagramPie chart
Show exact values for many itemsTableAny chart
Show variation across placesMap (choropleth, dot, proportional symbol)Long table of places

8. Mapping of Data

Mapping of data means showing data by location. A thematic map shows the spatial distribution of one theme (rainfall, literacy, population) on a base map.

Map typeHow it shows dataBest forExample
ChoroplethAdministrative areas shaded by value class; darker = higherRates, ratios, densities for defined areasState-wise literacy rate
Dot (dot density) mapEach dot = a fixed number of unitsDistribution of absolute countsPopulation distribution: 1 dot = 10,000 people
Isopleth (isoline) mapLines joining places of equal valueContinuous phenomena that do not stop at boundariesRainfall, temperature, elevation
Proportional (graduated) symbol mapCircles or squares sized by valueCounts at points or for areasCity populations
Flow mapLines whose width shows volume of movementMigration, trade, trafficInter-state migration
CartogramAreas distorted so their size is proportional to the valueDramatic comparisonStates resized by population

Isolines have specific names: isotherms (equal temperature), isobars (equal pressure), isohyets (equal rainfall), contours (equal height above sea level).

GIS and digital mapping

A Geographic Information System (GIS) stores, analyses and displays data linked to locations, usually as layers (roads, rivers, schools, census units) that can be overlaid. Data are either vector (points, lines, polygons) or raster (a grid of cells, such as a satellite image). Remote sensing (satellite and aerial imagery) and GPS feed GIS. Indian examples: Survey of India is the national mapping agency; Bhuvan is the geoportal of ISRO’s National Remote Sensing Centre; the PM Gati Shakti National Master Plan (launched 2021) is a GIS-based platform for planning infrastructure. Their use in policy is taken up in Data and Governance.


Memory Tricks

Don’t Confuse

ThisvsThat
Bar chart: gaps, categorical, length mattersvsHistogram: no gaps, continuous, area matters
Frequency polygon: frequencies at class marksvsOgive: cumulative frequencies at class limits
Less than ogive: upper limits, risingvsMore than ogive: lower limits, falling
Subdivided bar: components of a total in absolute valuesvsPercentage bar: every bar = 100%
Pie chart: shares of one wholevsLine chart: change over time
Line of values: falling line = falling valuesvsLine of growth rates: falling line can still mean rising values
Choropleth: shaded areas, ratesvsDot map: dots, counts
Isopleth: lines of equal valuevsChoropleth: shaded administrative units
Cartogram: area distorted by valuevsProportional symbol: symbol sized by value, map undistorted

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. In a pie chart, what central angle represents 35% of the total?
  2. What do isohyets join?
  3. In a histogram with unequal class widths, the height of each rectangle should equal ______.
Answers
  1. \( 35 \times 3.6 = 126^\circ \).
  2. Places of equal rainfall.
  3. The frequency density (frequency ÷ class width).

Level 2: Exam-style MCQs

Q1. (Practice) Which graph is most suitable for showing the change in a country’s literacy rate across successive censuses?

  • (a) Pie chart
  • (b) Line chart
  • (c) Histogram
  • (d) Choropleth map
Answer and explanation

(b) Line chart. One variable over time is a time series; a line chart shows its trend. A choropleth would show variation across places at one time, not change over time.

Q2. (Practice) In a pie chart of a household’s expenditure, the sector for rent has a central angle of 81°. If the total monthly expenditure is ₹40,000, the rent is:

  • (a) ₹8,100
  • (b) ₹9,000
  • (c) ₹10,000
  • (d) ₹12,000
Answer and explanation

(b) ₹9,000. \( \frac{81}{360} = 22.5\% \); \( 22.5\% \times 40{,}000 = 9{,}000 \).

Q3. (Practice) Consider the following statements:

  1. In a histogram the bars are drawn with gaps between them.
  2. The less than ogive and the more than ogive intersect at the median.
  3. A frequency polygon can be drawn by joining the mid-points of the tops of a histogram’s rectangles.

Which of the statements given above is/are correct?

  • (a) 1 and 2 only
  • (b) 2 and 3 only
  • (c) 1 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 2 and 3 only. Histogram bars touch because the classes are continuous.

Q4. (Practice) A researcher wants to show the percentage of households with piped water in each district of a state. The most appropriate map is:

  • (a) Dot map
  • (b) Flow map
  • (c) Choropleth map
  • (d) Isopleth map
Answer and explanation

(c) Choropleth. The data are a rate for administrative units (districts), which is exactly what a choropleth shades. Isopleths suit continuous phenomena like rainfall; dot maps suit counts.

Q5. (Practice) In a frequency distribution, the class 30–50 has a frequency of 24 and every other class has width 10. In a correctly drawn histogram, the height of the 30–50 bar, on the scale where height = frequency for width-10 classes, is:

  • (a) 24
  • (b) 48
  • (c) 12
  • (d) 6
Answer and explanation

(c) 12. The class is twice the standard width, so its height is halved to keep area proportional to frequency: \( \frac{24}{2} = 12 \).

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): A pie chart is unsuitable for showing the trend of a company’s sales over ten years. Reason (R): A pie chart shows the shares of components in a single whole.

Answer and explanation

(a). Because a pie represents one whole at one point, it cannot show change across ten periods. R explains A.

Q2. (Practice) Assertion (A): In a line chart of annual growth rates, a fall in the line from 12% to 4% shows that output fell. Reason (R): Output falls in a year only if its growth rate in that year is negative.

Answer and explanation

(d). A is false: growth of 4% still means output rose, only more slowly. R is true and is exactly why A is false.

Q3. (Practice) Match List I with List II.

List I (Representation)List II (Best use)
A. OgiveI. Relationship between two variables
B. Scatter diagramII. Shares of parts in a whole
C. Pie chartIII. Spatial distribution of population counts
D. Dot mapIV. Reading the median from cumulative frequencies
  • (1) A-IV, B-I, C-II, D-III
  • (2) A-I, B-IV, C-II, D-III
  • (3) A-IV, B-I, C-III, D-II
  • (4) A-II, B-I, C-IV, D-III
Answer and explanation

(1) A-IV, B-I, C-II, D-III.

Q4. (Practice) Arrange the following graphical inventions in chronological order:

  • A. Nightingale’s polar area diagram of Crimean War deaths

  • B. Playfair’s bar chart in The Commercial and Political Atlas

  • C. Minard’s flow map of Napoleon’s Russian campaign

  • D. Playfair’s pie chart in Statistical Breviary

  • E. John Snow’s cholera dot map of London

  • (1) B, D, E, A, C

  • (2) D, B, E, A, C

  • (3) B, D, A, E, C

  • (4) B, E, D, A, C

Answer and explanation

(1) B, D, E, A, C. 1786, 1801, 1854–55, late 1850s, 1869.


Quick Revision Table

FormKey fact
Table chartExact values; read title, units, totals first
Bar chartEqual widths, gaps, length ∝ value; simple, multiple, subdivided, percentage, deviation
HistogramContinuous classes, no gaps, area ∝ frequency; unequal widths → frequency density
Frequency polygonFrequencies at class marks; good for comparing two distributions
OgiveCumulative frequency; less-than rises, more-than falls; intersect at median
Pie chartAngle = percent × 3.6°; parts of one whole; few categories
Line chartTime series; slope = absolute change; growth-rate line ≠ value line
ScatterCorrelation between two variables
ChoroplethShaded areas, rates and densities
Dot mapCounts; 1 dot = fixed number
IsoplethLines of equal value: isotherm, isobar, isohyet, contour
CartogramArea distorted in proportion to value
PlayfairLine and bar 1786; pie 1801

Key Takeaways

What’s Next