Skip to content

Management Principles, Functions and Organisation Structure

UGC NET Commerce: Fayol's 14 principles, Taylor's scientific management, management functions, formal and informal organisation, span of control, delegation.

  • 19 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: The Shop Floor and the Boardroom
  3. 1. Management: Meaning and Nature
  4. 2. Evolution of Management Thought
  5. 3. Taylor’s Scientific Management
  6. 4. Fayol’s Administrative Theory
  7. 5. Functions of Management
  8. 6. Organisation Structure
  9. 7. Span of Control
  10. 8. Authority, Responsibility, Accountability and Delegation
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

This page covers three official lines: “Principles and functions of management”, “Organization structure: formal and informal organizations; span of control” and “Responsibility and authority: delegation of authority and decentralization”.

The Hook: The Shop Floor and the Boardroom


1. Management: Meaning and Nature

Two classic definitions turn up as options:

  • Mary Parker Follett: management is “the art of getting things done through people”.
  • Harold Koontz: management is the process of designing and maintaining an environment in which individuals, working together in groups, efficiently accomplish selected aims.
FeatureWhat it means
Goal-orientedExists to achieve organisational objectives
UniversalNeeded in every organisation: business, government, hospital, university
Continuous processPlanning, organising, staffing, directing and controlling repeat in a cycle
Group activityWorks through people, not alone
IntangibleSeen only in its results
DynamicAdapts to a changing environment
Multi-dimensionalManages work, people and operations

Is management a science, an art or a profession? It has some features of each: it uses systematic knowledge and cause–effect principles (science, though an inexact one), it relies on personal skill and practice (art), and it has a body of knowledge and formal education but no compulsory licence or single code of conduct. The usual exam answer is that management is both a science and an art, and only a partial or emerging profession.

Levels of management and managerial skills

LevelWhoMain concern
TopBoard, CEO, managing directorObjectives, policies, strategy
MiddleDivisional and departmental headsInterpret policy, coordinate units
Lower (supervisory / operative)Foremen, supervisorsDirect the work of operatives

Robert L. Katz (“Skills of an Effective Administrator”, Harvard Business Review, 1955) named three skills: technical, human and conceptual. Technical skill matters most at the lower level, conceptual skill most at the top, and human skill is needed equally at every level.

Mintzberg’s managerial roles

Henry Mintzberg (The Nature of Managerial Work, 1973) observed what managers actually do and grouped ten roles under three heads:

GroupRoles
InterpersonalFigurehead, leader, liaison
InformationalMonitor, disseminator, spokesperson
DecisionalEntrepreneur, disturbance handler, resource allocator, negotiator

2. Evolution of Management Thought

graph LR
    A["Classical school
Taylor: scientific management
Fayol: administrative theory
Weber: bureaucracy"] --> B["Neo-classical / human relations
Mayo: Hawthorne studies
Follett, Barnard"] B --> C["Behavioural science
Maslow, McGregor,
Herzberg, Argyris"] C --> D["Quantitative / management science
OR, decision models"] D --> E["Systems approach
Organisation as an open system"] E --> F["Contingency approach
No one best way;
it depends on the situation"]
SchoolKey thinker(s)Central idea
Scientific managementF. W. TaylorOne best way of doing each job, found by study
Administrative (process) theoryHenri FayolUniversal functions and principles for the whole organisation
BureaucracyMax WeberLegal-rational authority, hierarchy, rules, impersonality
Human relationsElton Mayo (Hawthorne studies at Western Electric)Social and informal factors affect productivity
BehaviouralMaslow, McGregor, HerzbergMotivation, needs and participation
SystemsOpen-systems writersInputs, transformation, outputs, feedback, environment
ContingencySituational writersThe right structure and style depend on the situation

3. Taylor’s Scientific Management

Frederick Winslow Taylor is called the father of scientific management. His main works are Shop Management (1903) and The Principles of Scientific Management (1911).

Principles

  1. Science, not rule of thumb: each element of a job is studied scientifically.
  2. Harmony, not discord between management and workers.
  3. Cooperation, not individualism.
  4. Development of each person to his or her greatest efficiency and prosperity (scientific selection and training).

Taylor called for a mental revolution: both sides should stop fighting over the division of surplus and work together to increase it.

Techniques

TechniqueWhat it does
Time studyFixes the standard time for each job
Motion studyRemoves needless movements
Fatigue studySets rest pauses
Method studyFinds the best way of doing a job
StandardisationStandard tools, materials and working conditions
Differential piece-rate systemA higher rate for workers who reach the standard output, a lower rate for those who do not
Functional foremanshipEight specialist foremen in place of one

Functional foremanship splits the foreman’s job into planning and doing:

Planning department (office)Production (shop floor)
Route clerkGang boss
Instruction card clerkSpeed boss
Time and cost clerkRepair boss
Shop disciplinarianInspector

Others in the scientific management movement: Frank and Lillian Gilbreth (motion study, therbligs), Henry Gantt (Gantt chart; task-and-bonus plan), and Harrington Emerson (efficiency principles; the efficiency bonus plan covered in Compensation, Appraisal and Industrial Relations).


4. Fayol’s Administrative Theory

Henri Fayol is called the father of modern (general) management theory. His book Administration Industrielle et Générale appeared in French in 1916; the widely used English translation, General and Industrial Management, came out in 1949.

Six groups of activities in an industrial undertaking

Technical, commercial, financial, security, accounting, and managerial. Fayol’s point was that the sixth, managerial activity, had been neglected.

Five elements (functions) of management

Planning (forecasting), organising, commanding, coordinating, controlling.

The 14 principles

#PrincipleMeaning
1Division of workSpecialisation increases output
2Authority and responsibilityAuthority must be matched by responsibility
3DisciplineObedience and respect for agreements
4Unity of commandEach employee receives orders from one superior only
5Unity of directionOne head and one plan for a group of activities with the same objective
6Subordination of individual interest to general interestOrganisation’s interest comes first
7RemunerationFair pay, satisfying both employee and firm
8CentralisationThe right degree of concentration of authority depends on the situation
9Scalar chainA chain of authority from top to bottom; the gang plank allows direct contact between equals with permission
10OrderA place for everything and everyone, and each in its place
11EquityKindliness and justice to employees
12Stability of tenure of personnelAvoid high labour turnover
13InitiativeEncourage employees to think out and carry out plans
14Esprit de corps“Union is strength”: team spirit

Taylor and Fayol compared

PointTaylorFayol
PerspectiveShop floor (bottom upward)Top management (top downward)
FocusProductivity of workersAdministration of the whole organisation
BackgroundEngineer, mechanical industriesMining engineer and managing director
Unity of commandNot followed (functional foremanship)Strongly upheld
Expression“Scientific management”“General theory of administration”
ApplicabilityMainly to productionUniversal

5. Functions of Management

Different authors divide the same work differently:

AuthorFunctions
Henri FayolPlanning, organising, commanding, coordinating, controlling
Luther Gulick (POSDCORB, 1937)Planning, Organising, Staffing, Directing, COordinating, Reporting, Budgeting
Koontz and O’DonnellPlanning, organising, staffing, directing, controlling
Common textbook formPlanning, organising, staffing, directing, controlling (POSDC); coordination is called the essence of management
FunctionCore questionKey ideas
PlanningWhat, how, when and by whom?Objectives, policies, procedures, rules, programmes, budgets, strategies; the primary function
OrganisingWho does what, and who reports to whom?Division of work, departmentation, authority relationships
StaffingWho will fill the positions?Manpower planning, recruitment, selection, training, appraisal (the HRM pages of this chapter)
DirectingHow do we get people to act?Supervision, motivation, leadership, communication
ControllingAre we on track?Set standards, measure performance, compare, correct deviations

Planning and controlling are called the Siamese twins of management: planning sets the standards against which control measures performance, and control feeds back into the next plan.

Peter Drucker introduced Management by Objectives (MBO) in The Practice of Management (1954): superiors and subordinates jointly set specific objectives, and performance is reviewed against them. It reappears as an appraisal method later in this chapter.


6. Organisation Structure

Organising creates a structure of roles and authority relationships. The organisation chart shows the formal structure; the organisation manual describes it in words.

Types of structure

StructureHow it worksStrengthsWeaknesses
Line (military / scalar)Authority flows in a straight line from top to bottomSimple, quick decisions, clear unity of commandOverloads executives, no specialists
Line and staffLine managers command; staff specialists adviseExpert advice plus unity of commandLine–staff conflict
FunctionalSpecialists have authority over their function across departments (Taylor’s idea)SpecialisationViolates unity of command
DivisionalSelf-contained divisions by product, territory or customerAccountability for results, growthDuplication of resources
MatrixFunctional and project lines overlap; employees report to two bossesFlexibility for projectsDual command, power struggles
Network / virtualCore firm coordinates outsourced partnersLean, flexibleLess control
Team-based / boundarylessCross-functional teams, few levelsSpeed, cooperationNeeds strong culture

Departmentation groups activities by function, product, territory, customer, process or time. Line authority is the right to command; staff authority is the right to advise; functional authority is a limited right of a specialist to give orders in his field to people outside his own line.

Formal and informal organisation

BasisFormal organisationInformal organisation
OriginDeliberately created by managementArises spontaneously from social interaction
PurposeAchieve organisational goalsSatisfy social and psychological needs
StructureShown on the chartNot shown; network of relationships
AuthorityFlows downward from positionArises from the group (personal power)
CommunicationOfficial channelsGrapevine
Behaviour governed byRules and proceduresNorms of the group
LeadershipAppointed managersInformal leaders chosen by the group
StabilityRelatively stableFluid

The Hawthorne studies at Western Electric’s Hawthorne Works (from the mid-1920s to the early 1930s), associated with Elton Mayo and Fritz Roethlisberger, are the classic evidence that informal groups set their own norms of output. Chester Barnard (The Functions of the Executive, 1938) argued that every formal organisation contains an informal one, and gave the acceptance theory of authority: authority depends on whether subordinates accept an order, and orders falling within their zone of indifference are accepted without question.

The grapevine carries informal communication. Keith Davis described its patterns, of which the cluster chain (one person tells a few selected others, some of whom pass it on) is the most common. Others are the single strand, gossip and probability chains.


7. Span of Control

Span of control (span of management, span of supervision) is the number of subordinates a manager can supervise effectively.

SpanStructureFeatures
NarrowTall: many levelsClose supervision, more managers and cost, slower communication
WideFlat: few levelsDelegation, autonomy, cheaper, faster communication; supervisor may be overloaded

Factors favouring a wide span: competent and trained subordinates, routine and similar work, clear plans and standards, good communication technology, subordinates working close together, little need for coordination, and a capable manager.

Graicunas’s theory of relationships

V. A. Graicunas, a French management consultant of Lithuanian origin, showed in 1933 that while the number of subordinates rises arithmetically, the number of relationships a superior must manage rises geometrically. For \( n \) subordinates:

TypeNumber
Direct single relationships\( n \)
Direct group relationships\( n(2^{n-1} - 1) \)
Cross relationships\( n(n-1) \)
$$ \text{Total relationships} = n\left(2^{n-1} + n - 1\right) $$
\( n \)12345678
Total relationships1618441002224901,080

Classical writers proposed small spans for upper levels. Modern practice, helped by communication technology and trained staff, uses wider spans and flatter structures.


8. Authority, Responsibility, Accountability and Delegation

TermMeaningFlowsCan it be delegated?
AuthorityThe right to command and take decisionsDownwardYes
ResponsibilityThe obligation to perform the assigned dutyUpwardNo: the delegator stays ultimately responsible
AccountabilityAnswerability for resultsUpwardNo

Parity of authority and responsibility: authority should be equal to responsibility. Authority without responsibility leads to misuse; responsibility without authority makes the job impossible.

Delegation

Delegation is the entrusting of part of a manager’s work, with the necessary authority, to a subordinate. Its three elements are assignment of responsibility (duty), grant of authority, and creation of accountability.

Principles of delegation: delegation by results expected, parity of authority and responsibility, absoluteness of responsibility (it cannot be passed on), unity of command, the scalar principle, and the authority-level principle (managers decide within their authority and refer the rest upward). The exception principle says that only significant deviations should be reported to the top.

Barriers to delegation: the superior’s fear of losing control, lack of confidence in subordinates, the “I can do it better myself” attitude, and the subordinate’s fear of criticism, lack of information or lack of incentive.

Centralisation and decentralisation

PointDelegationDecentralisation
NatureA process between one superior and one subordinateThe end result: authority systematically spread to all levels
ScopeIndividualOrganisation-wide
NecessityCompulsory: no manager can do everythingOptional: a policy decision of top management
ControlRetained by the delegatorLargely with the lower levels; top keeps policy control
PurposeLighten the manager’s loadAutonomy, faster decisions, development of managers

Ernest Dale suggested four tests of the degree of decentralisation: the number of decisions made at lower levels, their importance, the number of functions they affect, and how much checking with superiors they need. The more decisions, the more important they are, the more functions they cover and the less checking they need, the more decentralised the organisation.

Centralisation suits small firms, crises and activities needing uniformity. Decentralisation suits large, diversified, geographically spread firms and helps develop managers. Fayol treated the right balance between the two as a question of proportion that depends on the situation.


Memory Tricks

Don’t Confuse

PairFirstSecond
Unity of command vs unity of directionOne superior per employeeOne head and one plan per group of activities
Taylor vs FayolShop floor, efficiency, functional foremanshipTop management, 14 principles, unity of command
Scalar chain vs gang plankThe line of authorityA shortcut between equals across the chain, with permission
Narrow vs wide spanTall structureFlat structure
Delegation vs decentralisationA process, compulsoryAn end result and a policy, optional
Line vs staff authorityRight to commandRight to advise
Functional vs matrix structureSpecialists command across departmentsEmployees report to a functional and a project manager
Barnard’s zone of indifference vs Simon’s zone of acceptanceBarnard (1938): orders accepted without questionSimon’s later term for the same idea
Katz’s conceptual vs technical skillMost needed at the topMost needed at the lower level

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. Which of Fayol’s principles requires that an employee should receive orders from one superior only?
  2. Who wrote The Principles of Scientific Management (1911)?
  3. How many relationships does a manager with four subordinates have according to Graicunas?
Answers
  1. Unity of command.
  2. F. W. Taylor.
  3. \( 4(2^{3} + 4 - 1) = 4 \times 11 = \) 44.

Level 2: Exam-style MCQs

Q1. (Practice) “One head and one plan for a group of activities having the same objective” describes Fayol’s principle of:

  • (a) Unity of command
  • (b) Unity of direction
  • (c) Scalar chain
  • (d) Order
Answer and explanation

(b) Unity of direction. Unity of command is about one boss per person; unity of direction is about one plan per objective.

Q2. (Practice) Which of the following was not among the eight specialists under Taylor’s functional foremanship?

  • (a) Speed boss
  • (b) Route clerk
  • (c) Repair boss
  • (d) Quality circle leader
Answer and explanation

(d). The eight are route clerk, instruction card clerk, time and cost clerk and shop disciplinarian (planning), and gang boss, speed boss, repair boss and inspector (production). Quality circles are a much later, Japanese practice.

Q3. (Practice) Consider the following statements:

  1. Delegation of authority is compulsory, but decentralisation is optional.
  2. Accountability can be delegated along with authority.
  3. A wide span of control produces a flat organisation structure.

Which of the statements given above is/are correct?

  • (a) 1 and 2 only
  • (b) 1 and 3 only
  • (c) 2 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 1 and 3 only. Accountability, like responsibility, cannot be delegated.

Q4. (Practice) A manager’s span of control rises from 5 to 6 subordinates. By Graicunas’s formula, the increase in the number of relationships is:

  • (a) 22
  • (b) 100
  • (c) 122
  • (d) 222
Answer and explanation

(c) 122. For 5: \( 5(16 + 4) = 100 \). For 6: \( 6(32 + 5) = 222 \). Increase \( 222 - 100 = 122 \).

Q5. (Practice) Which pair is incorrectly matched?

  • (a) Chester Barnard: acceptance theory of authority
  • (b) Luther Gulick: POSDCORB
  • (c) Henry Mintzberg: ten managerial roles
  • (d) Robert Katz: fourteen principles of management
Answer and explanation

(d). The fourteen principles are Fayol’s. Katz gave the three managerial skills: technical, human and conceptual.

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): Taylor’s functional foremanship conflicts with Fayol’s principle of unity of command. Reason (R): Under functional foremanship a worker receives orders from several specialist foremen.

Answer and explanation

(a). Both are true, and receiving orders from eight foremen is exactly why the system breaks unity of command.

Q2. (Practice) Assertion (A): A superior remains responsible for a task even after delegating it. Reason (R): Authority cannot be delegated to a subordinate.

Answer and explanation

(c). A is true (absoluteness of responsibility). R is false: authority is the one element that can be delegated.

Q3. (Practice) Match List I (Thinker) with List II (Contribution).

List IList II
A. Henri FayolI. Ten managerial roles
B. V. A. GraicunasII. Fourteen principles of management
C. Henry MintzbergIII. Degree of decentralisation tests
D. Ernest DaleIV. Relationships and span of control
  • (1) A-II, B-IV, C-I, D-III
  • (2) A-II, B-I, C-IV, D-III
  • (3) A-IV, B-II, C-I, D-III
  • (4) A-II, B-IV, C-III, D-I
Answer and explanation

(1) A-II, B-IV, C-I, D-III.

Q4. (Practice) Arrange the following works in chronological order of first publication:

  • A. Gulick’s “Notes on the Theory of Organization” (POSDCORB)

  • B. Taylor’s The Principles of Scientific Management

  • C. Fayol’s Administration Industrielle et Générale

  • D. Drucker’s The Practice of Management

  • (1) B, C, A, D

  • (2) C, B, A, D

  • (3) B, A, C, D

  • (4) C, A, B, D

Answer and explanation

(1) B, C, A, D. 1911 → 1916 → 1937 → 1954.

Q5. (Practice) Arrange the steps of the control process in order:

  • A. Taking corrective action

  • B. Setting standards

  • C. Comparing performance with standards

  • D. Measuring actual performance

  • (1) B, D, C, A

  • (2) B, C, D, A

  • (3) D, B, C, A

  • (4) B, D, A, C

Answer and explanation

(1) B, D, C, A. Standards first, then measurement, comparison and correction.


Quick Revision Table

ItemKey fact
TaylorFather of scientific management; Shop Management 1903, Principles of Scientific Management 1911
Taylor’s techniquesTime, motion, fatigue and method study; differential piece rate; functional foremanship (8 foremen)
FayolFather of modern management theory; 1916 (English 1949); 6 activities, 5 elements, 14 principles
Fayol’s fivePlanning, organising, commanding, coordinating, controlling
GulickPOSDCORB (1937)
Katz (1955)Technical, human, conceptual skills
Mintzberg (1973)10 roles: interpersonal, informational, decisional
Drucker (1954)MBO, The Practice of Management
Barnard (1938)Acceptance theory; zone of indifference; informal organisation
Graicunas (1933)\( n(2^{n-1} + n - 1) \); 1, 6, 18, 44, 100, 222
Wide / narrow spanFlat / tall
DelegationAuthority delegated; responsibility and accountability not
Dale’s testsNumber, importance, functions affected, checking
Delegation vs decentralisationProcess, compulsory / end result, optional

Key Takeaways

What’s Next