Skip to content

Compensation, Performance Appraisal, Collective Bargaining and Workers' Participation

UGC NET Commerce: job evaluation, Halsey and Rowan incentives, fringe benefits, 360 degree appraisal, collective bargaining and workers' participation.

  • 20 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Two Questions Every Employee Asks
  3. 1. Compensation Management
  4. 2. Job Evaluation
  5. 3. Incentives
  6. 4. Fringe Benefits
  7. 5. Performance Appraisal
  8. 6. Collective Bargaining
  9. 7. Workers’ Participation in Management (WPM)
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

This page covers three official lines: “Compensation management: job evaluation; incentives and fringe benefits”, “Performance appraisal including 360 degree performance appraisal” and “Collective bargaining and workers’ participation in management”.

The Hook: Two Questions Every Employee Asks


1. Compensation Management

Compensation is everything an employee receives in return for work.

ComponentExamples
Direct (financial)Basic pay, dearness allowance, other allowances, overtime, incentives, bonus, commission
Indirect (fringe benefits)Provident fund, gratuity, insurance, medical care, leave, housing, canteen, education
Non-financialRecognition, challenging work, career growth, work–life balance

Wage concepts

The Committee on Fair Wages (1948) defined three levels:

LevelMeaning
Minimum wageEnough for bare subsistence plus some provision for efficiency (education, medical care, amenities)
Fair wageBetween the minimum and the living wage, depending on productivity, prevailing rates and the capacity of the industry to pay
Living wageEnough for a reasonable standard of comfort: food, clothing, housing, education, insurance, and some comforts

Wage theories in options: subsistence theory (wages tend to the subsistence level; associated with Ricardo), wage-fund theory (a fixed fund for wages; associated with J. S. Mill), residual claimant theory (Walker), marginal productivity theory (J. B. Clark), and bargaining theory (wages settled by relative bargaining power).

Pay structure tools: pay grades and ranges, broadbanding (fewer, wider grades), wage and salary surveys, and the compa-ratio:

$$ \text{Compa-ratio} = \frac{\text{Actual pay}}{\text{Mid-point of the pay range}} $$

A ratio of 0.9 (actual pay ₹54,000 against a mid-point of ₹60,000) means the employee is paid 10% below the mid-point.


2. Job Evaluation

Job evaluation is the systematic process of determining the relative worth of jobs in an organisation, so that a fair and consistent pay structure can be built. It rates the job, not the jobholder. It is based on job analysis (job description and specification).

Process: gain acceptance → form an evaluation committee → identify and analyse jobs → choose the method → evaluate jobs → build the pay structure → review.

Methods

MethodTypeHow it worksStrength / weakness
RankingNon-quantitative, whole jobJobs ranked from highest to lowest as wholesSimple, cheap / subjective; shows order, not distance between jobs
Job classification (grading)Non-quantitative, whole jobPre-set grades with descriptions; each job slotted into a grade (common in government service)Easy to understand / rigid, broad grades
Factor comparisonQuantitative, factor-basedKey (benchmark) jobs ranked on factors such as mental requirements, skill, physical requirements, responsibility and working conditions; their pay is split across the factors; other jobs compared factor by factor in money termsDetailed / complex, hard to explain
Point rating (point factor)Quantitative, factor-basedCompensable factors divided into degrees, each with points; a job’s total points decide its gradeMost widely used, objective / costly to design

The Hay Guide Chart-Profile method, a widely used point-type method, scores jobs on know-how, problem solving and accountability (with working conditions where relevant).


3. Incentives

An incentive is a payment over and above the basic wage for performance above a standard. Notation: \( S \) = standard (allowed) time, \( T \) = time taken, \( R \) = rate per hour.

Individual incentive plans

PlanEarningsKey feature
Time rate\( T \times R \)No incentive
Straight piece rateUnits × rate per unitPure output-based
Halsey premium plan\( T R + 50\% \times (S - T) R \)Bonus = half of the time saved (the share can vary; the Halsey–Weir variant uses one-third)
Rowan plan\( T R + \dfrac{S - T}{S} \times T R \)Bonus = proportion of time saved × time wages
Taylor’s differential piece rateLow rate below standard, high rate at or above standardSharp penalty for low output
Merrick’s multiple piece rateThree graded piece ratesMilder than Taylor’s
Gantt task and bonusTime wage guaranteed below standard; bonus at standardGuaranteed minimum
Emerson’s efficiency planTime wage guaranteed; bonus starts at an efficiency of \( 66\tfrac{2}{3}\% \) and rises with efficiencyGradual bonus
Bedaux point planWork measured in “B” points (one minute of work)Bonus on points saved

The rule: when the time saved is less than half of the standard time, Rowan pays more; at exactly half both pay the same; when it is more than half, Halsey pays more. Under Rowan the bonus can never exceed the time wages for the hours worked, which protects the employer when standards are loose.

Group and organisation-wide plans

PlanFeature
Scanlon planGain-sharing based on the ratio of labour cost to sales value of production; suggestion committees
Rucker planGain-sharing based on value added
Improshare (Improved Productivity through Sharing)Gain-sharing based on hours saved against a standard
Profit sharingA share of company profits paid to employees
Co-partnership / ESOPEmployees acquire shares and thus a stake in ownership

Requirements of a good incentive plan: simple and understandable, fair standards set by work study, linked directly to effort, paid promptly, with a guaranteed minimum and union acceptance.


4. Fringe Benefits

Fringe benefits are supplementary benefits given in addition to wages, usually not linked to performance.

Statutory (required by law)Voluntary (employer’s choice)
Provident fund (Employees’ Provident Funds and Miscellaneous Provisions Act, 1952)Housing, transport, canteen
Employees’ State Insurance (ESI Act, 1948)Medical facilities beyond ESI, group insurance
Gratuity (Payment of Gratuity Act, 1972)Education for children, scholarships
Maternity benefit (Maternity Benefit Act, 1961; 26 weeks after the 2017 amendment)Leave travel concession, holiday homes
Bonus (Payment of Bonus Act, 1965: minimum 8.33%, maximum 20%)Recreation, clubs, counselling, employee assistance

Gratuity under the 1972 Act is paid on leaving after at least five years of continuous service (the condition is waived on death or disablement), at 15 days’ wages for each completed year, with the month taken as 26 working days:

$$ \text{Gratuity} = \text{Last drawn monthly wages} \times \frac{15}{26} \times \text{Completed years of service} $$

Cafeteria (flexible) benefits let each employee choose from a menu of benefits up to a fixed value, which suits a diverse workforce.


5. Performance Appraisal

Performance appraisal is the systematic evaluation of an employee’s performance on the job and of his potential for development. Potential appraisal looks forward: can he handle higher responsibilities?

Uses: pay increments and incentives, promotion and transfer, training needs, feedback and counselling, validation of selection tests, and HR planning.

Process: set performance standards → communicate them → measure actual performance → compare with standards → discuss the appraisal with the employee (appraisal interview) → take corrective action or decisions.

Methods

Traditional (past-oriented)Modern (future-oriented)
Straight rankingManagement by Objectives (MBO) (Drucker, 1954)
Paired comparisonBehaviourally Anchored Rating Scales (BARS) (Smith and Kendall, 1963)
Forced distributionAssessment centre
Graphic rating scale360-degree appraisal
Checklist (simple, weighted)Human resource accounting
Forced choicePsychological appraisal
Critical incident (Flanagan, 1954)
Essay (free form), field review, confidential report
  • Paired comparison: each employee is compared with every other, one pair at a time. Number of comparisons \( = \dfrac{N(N-1)}{2} \). For 8 employees, \( 8 \times 7 \div 2 = 28 \) comparisons.
  • Forced distribution: raters must place fixed percentages of employees in each category (for example 10% top, 20% above average, 40% average, 20% below average, 10% bottom), based on the normal curve. It controls leniency and central tendency.
  • Graphic rating scale: traits (quality, quantity, dependability) rated on a scale; the most common traditional method.
  • Critical incident: the supervisor records examples of especially good or bad behaviour during the period.
  • BARS: combines critical incidents with a rating scale; each point on the scale is anchored by a description of actual behaviour.
  • Assessment centre: candidates go through simulations (in-basket, group discussion, role play) observed by several trained assessors; mainly for potential appraisal of managers.

Rating errors

ErrorWhat happens
Halo effectOne favourable trait colours the whole rating
Horn effectOne unfavourable trait colours the whole rating
LeniencyRating everyone high
Strictness (severity)Rating everyone low
Central tendencyRating everyone average
RecencyJudging by recent events only
Similar-to-meFavouring those like the rater
ContrastRating relative to the previous employee rated, not against standards
Personal biasPrejudice on caste, gender, religion and the like

360-degree appraisal

360-degree appraisal (multi-source or multi-rater feedback) collects ratings of an employee from everyone around him:

graph TD
    E(("Employee")) --- S["Superior"]
    E --- P["Peers"]
    E --- U["Subordinates"]
    E --- C["Internal and external customers"]
    E --- SF["Self-appraisal"]
AdvantagesLimitations
Wider, more balanced pictureTime-consuming and costly
Reduces a single superior’s biasPeers may collude or settle scores
Captures behaviour that the boss does not seeSubordinates may fear reprisal unless anonymous
Useful for leadership developmentRaters need training; feedback can hurt if handled badly

Good practice keeps raters anonymous, uses the results mainly for development rather than pay, and has a trained facilitator give the feedback. A 720-degree appraisal, in common usage, repeats the 360-degree exercise after a period (or adds external stakeholders) to check whether the person has acted on the feedback.


6. Collective Bargaining

Collective bargaining is the process by which employers and organised employees (through their unions) negotiate terms and conditions of employment, and administer the resulting agreement. The ILO describes it as negotiation between an employer (or employers’ organisation) and workers’ organisations about working conditions and terms of employment. The term is generally credited to Sidney and Beatrice Webb.

Features: collective (group action); bipartite (employer and union; government only as facilitator); continuous; flexible give-and-take; a form of industrial democracy.

Theories (Neil Chamberlain)

TheoryCollective bargaining is…
Marketing theoryA contract for the sale of labour
Governmental theoryA constitutional system of rules governing the workplace
Managerial (industrial relations) theoryJoint decision-making in which unions share in management

Types (Walton and McKersie, 1965)

Richard Walton and Robert McKersie (A Behavioral Theory of Labor Negotiations, 1965) identified four sub-processes:

TypeNature
Distributive bargainingWin–lose; dividing a fixed amount (wages)
Integrative bargainingWin–win; solving shared problems (productivity, safety)
Attitudinal structuringShaping trust and attitudes between the parties
Intra-organisational bargainingBuilding consensus within each side

Other forms: productivity bargaining (pay increases traded for productivity gains), concessionary bargaining (unions give up gains in hard times), and composite bargaining (bargaining on wider issues such as staffing and policy).

Levels: plant (unit) level, industry level, and national level.

Process

graph LR
    A["Preparation
(data, charter of demands)"] --> B["Negotiation"] B --> C["Agreement
(settlement)"] C --> D["Implementation
and administration"]

If talks fail, the parties may use conciliation, mediation, voluntary arbitration or adjudication, and pressure tactics such as strikes and lockouts.

Prerequisites: a strong, representative union and its recognition; willingness to give and take; a fact-based approach; and a supportive legal framework.

Indian and international framework

  • Trade Unions Act, 1926: registration of unions.
  • Industrial Disputes Act, 1947: a settlement reached in conciliation or by agreement binds the parties (Section 18).
  • Code of Discipline (Indian Labour Conference, 1958): voluntary, includes guidelines on union recognition.
  • ILO Conventions No. 87 (Freedom of Association, 1948) and No. 98 (Right to Organise and Collective Bargaining, 1949). India has not ratified either.
  • Industrial Relations Code, 2020: replaces the 1926, 1946 and 1947 Acts and provides for a negotiating union or negotiating council in an establishment.

7. Workers’ Participation in Management (WPM)

WPM gives workers a say in managerial decisions that affect them. It is an expression of industrial democracy.

Constitutional basis: Article 43A (inserted by the 42nd Amendment, 1976), a Directive Principle: the State shall take steps to secure the participation of workers in the management of undertakings.

Forms and levels

Level of participationNature
Information sharingManagement informs workers
ConsultativeWorkers are consulted; management decides
AssociativeManagement accepts the joint body’s recommendations
AdministrativeWorkers share in implementing decisions
Decisive (co-decision)Joint decisions on major issues
FormExample
Joint consultationWorks committees, joint management councils
Board representationWorker directors
Ownership participationCo-partnership, ESOPs
Suggestion and problem-solvingSuggestion schemes, quality circles (associated with Kaoru Ishikawa in Japan, from 1962)
Self-managementWorkers’ councils (the former Yugoslav model)
Co-determinationGerman Mitbestimmung: employee seats on supervisory boards

Indian schemes in sequence

YearSchemeKey point
1947Works committees (Section 3, Industrial Disputes Act)Establishments with 100 or more workmen; equal representatives of employer and workers
1958Joint Management Councils (JMCs)Followed the Industrial Policy Resolution, 1956; consultative, voluntary
1975Shop councils and joint councilsManufacturing and mining units with 500 or more workers; shop level and plant level
1977Scheme for commercial and service organisations in the public sectorExtended participation to services such as hospitals and banks
1983Comprehensive schemeParticipation at shop floor, plant and board levels in central public sector undertakings
1990Participation of Workers in Management BillIntroduced in Parliament; never enacted

Why WPM has had limited success in India: multiplicity of unions and inter-union rivalry, management’s reluctance to share power, workers’ lack of education and information, overlap with collective bargaining, and the voluntary nature of most schemes.


Memory Tricks

Don’t Confuse

PairFirstSecond
Job evaluation vs performance appraisalWorth of the jobPerformance of the person
Factor comparison vs point ratingMoney values against key jobsPoints per factor degree
Ranking vs paired comparisonSingle overall rankingEach pair compared; \( N(N-1)/2 \) comparisons
Halsey vs RowanFixed share (50%) of time savedProportion of time saved × time wages; bonus never exceeds time wages
Halo vs horn effectOne good trait inflatesOne bad trait deflates
Leniency vs central tendencyEveryone rated highEveryone rated average
Distributive vs integrative bargainingWin–loseWin–win
Collective bargaining vs WPMBipartite negotiation of termsWorkers share in decisions
Works committee vs JMC1947, statutory (ID Act)1958, voluntary
ILO C87 vs C98Freedom of association (1948)Right to organise and collective bargaining (1949)

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. Which two job evaluation methods are quantitative?
  2. How many comparisons are needed to rate 12 employees by the paired comparison method?
  3. Which Article of the Constitution provides for workers’ participation in management?
Answers
  1. Factor comparison and point rating.
  2. \( 12 \times 11 \div 2 = \) 66.
  3. Article 43A (42nd Amendment, 1976).

Level 2: Exam-style MCQs

Q1. (Practice) Standard time for a job is 40 hours, time taken is 30 hours, and the wage rate is ₹60 per hour. The worker’s earnings under the Rowan plan are:

  • (a) ₹2,100
  • (b) ₹2,250
  • (c) ₹2,400
  • (d) ₹1,800
Answer and explanation

(b) ₹2,250. Time wages \( = 30 \times 60 = 1{,}800 \). Bonus \( = \tfrac{40 - 30}{40} \times 1{,}800 = 0.25 \times 1{,}800 = 450 \). Total ₹2,250. Option (a) is the Halsey figure: \( 1{,}800 + 0.5 \times 10 \times 60 = 2{,}100 \). Since only a quarter of standard time was saved (less than half), Rowan pays more, as expected.

Q2. (Practice) Which appraisal method anchors points on a rating scale with descriptions of actual job behaviour?

  • (a) Graphic rating scale
  • (b) Forced distribution
  • (c) BARS
  • (d) Field review
Answer and explanation

(c) Behaviourally Anchored Rating Scales, which combine critical incidents with a rating scale.

Q3. (Practice) In Walton and McKersie’s framework, bargaining in which both sides look for solutions that benefit both is:

  • (a) Distributive bargaining
  • (b) Integrative bargaining
  • (c) Attitudinal structuring
  • (d) Intra-organisational bargaining
Answer and explanation

(b) Integrative bargaining (win–win).

Q4. (Practice) Consider the following statements about 360-degree appraisal:

  1. It includes feedback from subordinates and peers.
  2. It is usually recommended mainly for developmental purposes.
  3. It removes the need for training raters.

Which of the statements given above is/are correct?

  • (a) 1 only
  • (b) 1 and 2 only
  • (c) 2 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 1 and 2 only. Multi-source feedback needs more rater training, not less.

Q5. (Practice) An employee’s last drawn monthly wages are ₹26,000 and he has 10 completed years of service. His gratuity under the Payment of Gratuity Act, 1972 is:

  • (a) ₹1,30,000
  • (b) ₹1,50,000
  • (c) ₹2,60,000
  • (d) ₹1,56,000
Answer and explanation

(b) ₹1,50,000. \( 26{,}000 \times 15 \div 26 \times 10 = 15{,}000 \times 10 \). Option (a) wrongly divides by 30 (\( 26{,}000 \times 15 \div 30 \times 10 \)).

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): Forced distribution reduces the central tendency and leniency errors. Reason (R): Under forced distribution, the rater must place fixed percentages of employees in each performance category.

Answer and explanation

(a). Because the rater cannot put everyone in the middle or at the top, those errors are controlled.

Q2. (Practice) Assertion (A): Job evaluation determines the relative worth of the jobholder. Reason (R): Job evaluation is based on job descriptions and job specifications.

Answer and explanation

(d). A is false: job evaluation determines the worth of the job, not the jobholder. R is true.

Q3. (Practice) Match List I (Incentive plan) with List II (Feature).

List IList II
A. Halsey planI. Gain-sharing based on labour cost to sales value ratio
B. Rowan planII. Bonus is a fixed share of time saved
C. Scanlon planIII. Bonus starts at two-thirds efficiency
D. Emerson planIV. Bonus can never exceed time wages
  • (1) A-II, B-IV, C-I, D-III
  • (2) A-IV, B-II, C-I, D-III
  • (3) A-II, B-IV, C-III, D-I
  • (4) A-II, B-I, C-IV, D-III
Answer and explanation

(1) A-II, B-IV, C-I, D-III.

Q4. (Practice) Arrange the following Indian schemes of workers’ participation in chronological order:

  • A. Joint Management Councils

  • B. Comprehensive scheme for central public sector undertakings

  • C. Works committees under the Industrial Disputes Act

  • D. Shop councils and joint councils

  • (1) C, A, D, B

  • (2) A, C, D, B

  • (3) C, D, A, B

  • (4) C, A, B, D

Answer and explanation

(1) C, A, D, B. 1947 → 1958 → 1975 → 1983.

Q5. (Practice) Arrange the steps of collective bargaining in order:

  • A. Implementation of the agreement

  • B. Preparation of the charter of demands

  • C. Negotiation

  • D. Signing of the agreement

  • (1) B, C, D, A

  • (2) C, B, D, A

  • (3) B, D, C, A

  • (4) B, C, A, D

Answer and explanation

(1) B, C, D, A.


Quick Revision Table

ItemKey fact
Committee on Fair Wages1948; minimum, fair, living wage
Compa-ratioActual pay ÷ range mid-point
Job evaluationWorth of jobs; ranking, classification (non-quantitative); factor comparison, point rating (quantitative)
Hay methodKnow-how, problem solving, accountability
Halsey\( TR + 50\%(S-T)R \)
Rowan\( TR + \frac{S-T}{S} TR \); bonus ≤ time wages
Halsey vs RowanSaving < 50%: Rowan higher; = 50%: equal; > 50%: Halsey higher
EmersonBonus from \( 66\tfrac{2}{3}\% \) efficiency
Group plansScanlon, Rucker, Improshare, profit sharing, ESOP
GratuityWages × 15/26 × years; 5-year minimum; ceiling ₹20 lakh
Bonus Act 19658.33% minimum, 20% maximum
Paired comparison\( N(N-1)/2 \)
BARS / critical incidentSmith and Kendall 1963 / Flanagan 1954
360-degreeSuperior, peers, subordinates, customers, self
Walton and McKersie (1965)Distributive, integrative, attitudinal structuring, intra-organisational
ChamberlainMarketing, governmental, managerial theories
ILO C87 / C981948 / 1949; not ratified by India
Article 43A42nd Amendment, 1976; Directive Principle
WPM schemes1947 works committees, 1958 JMCs, 1975 shop and joint councils, 1977 services, 1983 comprehensive
Quality circlesIshikawa, Japan, 1962

Key Takeaways

What’s Next