Skip to content

Market Structures and Pricing: Competition, Monopoly, Oligopoly and Pricing Strategies

UGC NET Commerce: pricing under perfect competition, monopoly, monopolistic competition and oligopoly; price discrimination; skimming, penetration, peak load.

  • 24 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: Four Ways to Sell a Product
  3. 1. Market Forms at a Glance
  4. 2. Perfect Competition
  5. 3. Monopoly
  6. 4. Price Discrimination
  7. 5. Monopolistic Competition
  8. 6. Oligopoly
  9. 7. Pricing Strategies
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

This page covers two official lines: “Price determination under different market forms: perfect competition; monopolistic competition; oligopoly - price leadership model; monopoly; price discrimination” and “Pricing strategies: price skimming; price penetration; peak load pricing”. It is the largest line of the unit and the one most often set as match-the-following.

The Hook: Four Ways to Sell a Product


1. Market Forms at a Glance

FeaturePerfect competitionMonopolistic competitionOligopolyMonopoly
Number of sellersVery largeLargeFewOne
ProductHomogeneousDifferentiatedHomogeneous or differentiatedNo close substitute
Entry and exitFreeFree (relatively easy)BarriersBlocked
Control over priceNone (price-taker)SomeConsiderable, but interdependentConsiderable (price-maker)
Firm’s demand (AR)Horizontal (perfectly elastic)Downward, highly elasticUncertain; kinked in Sweezy’s modelDownward, less elastic (= market demand)
AR and MRAR = MRMR < ARMR < ARMR < AR
Selling costsNoneHeavyHeavySome (informative)
Long-run profitNormal onlyNormal onlyCan be supernormalCan be supernormal
ExampleAgricultural produce (approximately), stock marketSoaps, restaurants, salonsTelecom, cement, aviation, carsRailways, local utilities (regulated)

General equilibrium rule (all markets): produce where \( MR = MC \) and MC cuts MR from below. Then read the price off the AR curve at that output, and compare it with ATC for profit or loss.


2. Perfect Competition

Features: a very large number of buyers and sellers; homogeneous product; free entry and exit; perfect knowledge; perfect mobility of factors; no transport cost; no government interference. (Pure competition has the first three only.)

Price is set by industry demand and supply; each firm is a price-taker, so its demand curve is horizontal at that price and \( P = AR = MR \).

Short-run equilibrium of the firm

Condition: \( P = MR = MC \), MC rising. Depending on where price stands relative to ATC and AVC:

Price relative to costsResult
\( P > ATC \)Supernormal (economic) profit
\( P = ATC \)Normal profit (break-even point: minimum ATC)
\( AVC < P < ATC \)Loss, but stay open: price covers variable cost and part of fixed cost
\( P = \min AVC \)Shut-down point
\( P < \min AVC \)Shut down: producing loses more than the fixed cost

The firm’s short-run supply curve is the rising part of its MC curve above minimum AVC.

Long-run equilibrium

Free entry eliminates supernormal profit and free exit eliminates losses. Long-run equilibrium of the firm:

$$P = MR = AR = SMC = SAC = LMC = LAC \;(\text{at its minimum})$$

Every firm earns normal profit and produces at the minimum point of LAC, the optimum size. This is why perfect competition is the benchmark of efficiency: price equals marginal cost (allocative efficiency) and output is at minimum average cost (productive efficiency).

Long-run industry supply is horizontal for a constant-cost industry, upward-sloping for an increasing-cost industry, and downward-sloping for a decreasing-cost industry (external economies).


3. Monopoly

Monopoly is a market with a single seller of a product with no close substitutes, protected by barriers to entry: legal (patents, licences, statutory monopolies), control of an essential raw material, natural monopoly (economies of scale so large that one firm can supply the market most cheaply, as in water and power distribution), or heavy initial investment.

Equilibrium

The monopolist’s AR is the market demand curve, downward sloping, with MR below it.

  1. MR = MC, with MC cutting MR from below.
  2. Price is read from the AR curve: P > MR = MC.
  3. Because MC > 0, MR > 0, so the monopolist produces where \( e > 1 \) (the elastic part of demand).
  4. There is no unique supply curve under monopoly: the same MC can go with different prices depending on demand elasticity.
  5. In the short run the monopolist can make profit or (if demand is weak) a loss; in the long run, since entry is blocked, it can keep supernormal profit.

Measuring monopoly power: the Lerner index (Abba Lerner, 1934):

$$L = \frac{P - MC}{P} = \frac{1}{e}$$

It is 0 under perfect competition (P = MC) and rises with monopoly power.

Compared with perfect competition, monopoly gives higher price, lower output, P > MC (allocative inefficiency), no pressure to produce at minimum LAC (since entry is blocked), supernormal profit and a deadweight loss. In its favour: natural monopolies can have lower costs, and monopoly profit can fund research (Schumpeter’s argument).


4. Price Discrimination

Price discrimination means selling the same product at different prices to different buyers (or markets) for reasons not related to differences in cost. Joan Robinson analysed it in The Economics of Imperfect Competition (1933).

Degrees (A. C. Pigou)

A. C. Pigou (The Economics of Welfare, 1920) classified price discrimination into three degrees:

DegreeMeaningConsumer surplusExample
First degree (perfect)Each unit sold at the maximum price the buyer would payEntirely captured by the sellerA doctor charging each patient according to means (approximation); auctions
Second degreePrices vary with quantity bought (blocks or slabs)Partly capturedBlock tariffs for electricity, bulk discounts
Third degreeBuyers divided into groups (markets) with different elasticities; one price per groupPartly capturedStudent and senior-citizen fares, domestic vs export price, different tariffs for households and industry

Conditions for price discrimination

  1. The seller must have some monopoly power (not possible under perfect competition).
  2. The markets must be separable, with no resale (no arbitrage) from the cheap market to the dear one. Separation can come from geography, tariffs, the nature of the good (services such as a doctor’s consultation cannot be resold), legal sanction, buyer ignorance or prejudice.
  3. Price elasticities must differ between markets. If they were equal, discrimination would not raise profit.

Equilibrium under third-degree discrimination

The discriminating monopolist:

  1. Sets total output where the aggregate MR (horizontal sum of \( MR_1 \) and \( MR_2 \)) equals MC.
  2. Allocates output so that \( MR_1 = MR_2 = MC \).
  3. Charges a higher price in the less elastic market and a lower price in the more elastic market.

From \( MR = P(1 - 1/e) \): \( P_1(1 - 1/e_1) = P_2(1 - 1/e_2) \), so \( P_1 > P_2 \) whenever \( e_1 < e_2 \).

Dumping is international price discrimination: selling abroad (where demand is more elastic because of competition) at a lower price than at home.

Is price discrimination always bad? Not necessarily. It can let a firm supply a market that would otherwise go unserved (a railway or a hospital that could not cover costs at a single price), and first-degree discrimination produces the competitive output (though all surplus goes to the seller).


5. Monopolistic Competition

The theory was developed by Edward H. Chamberlin in The Theory of Monopolistic Competition (1933). (Joan Robinson’s The Economics of Imperfect Competition, the same year, covered similar ground under the name “imperfect competition”.)

Features: a large number of firms; product differentiation (brand, design, quality, packaging, location, service), so each firm has a small monopoly over its brand; free entry and exit; selling costs (advertising, sales promotion); some non-price competition; Chamberlin’s idea of a product group instead of an industry.

The demand curve of each firm slopes down but is highly elastic, because close substitutes exist.

Equilibrium

  • Short run: MR = MC; the firm may earn supernormal profit, normal profit or a loss.
  • Long run: supernormal profit attracts new brands; each firm’s demand curve shifts left (and becomes more elastic) until it is tangent to the LAC curve. At that point \( P = LAC \): normal profit. The tangency lies on the falling part of LAC (because AR slopes down), so the firm produces less than the output at minimum LAC.
$$\text{Long run: } MR = LMC \text{ and } AR = LAC \text{ (tangency), on the falling part of LAC}$$

Selling costs are expenses to change the buyer’s preferences (advertising, salesmen, displays), as distinct from production costs which make the good. Chamberlin added them to the analysis; the firm spends on selling costs up to the point where the extra revenue they bring equals their extra cost.


6. Oligopoly

Oligopoly is competition among the few. The defining feature is interdependence: each firm’s best price or output depends on how rivals will react. Hence there is no single, general theory of oligopoly, only models built on different assumptions about rivals’ behaviour. A market of exactly two sellers is duopoly.

Features: few sellers; interdependence; barriers to entry; heavy advertising and non-price competition; price rigidity; uncertainty and an indeterminate demand curve; a tendency to collusion (cartels) or to follow a leader.

Classic models (outline)

ModelYearKey idea
Cournot duopoly (Antoine Augustin Cournot)1838Each firm chooses output, assuming the rival’s output stays fixed
Bertrand1883Firms compete on price; with identical products, price is driven down towards MC
Stackelberg1934A leader chooses output first; the follower reacts
Kinked demand curve (Paul Sweezy; also Hall and Hitch)1939Explains price rigidity
Cartel (collusive oligopoly)—Firms agree jointly on price and output, acting like a monopoly; unstable because each member gains by cheating (OPEC is the standard example)
Price leadership—One firm sets the price; others follow (the official syllabus model; see below)
Game theory (von Neumann and Morgenstern, 1944)1944Strategic interdependence; the prisoners’ dilemma explains why cartels break down

The kinked demand curve

Sweezy assumed that rivals match a price cut (to protect their market share) but do not follow a price rise (to win customers from the firm that raised). So the firm’s demand curve is:

  • Elastic above the current price (a rise loses many customers);
  • Inelastic below it (a cut is matched, so few customers are gained).

The demand curve has a kink at the prevailing price, and the MR curve has a vertical gap (discontinuity) below the kink. MC can move up or down within that gap without changing the profit-maximising price and output: price rigidity. The model explains why prices are sticky but not how the price at the kink was reached.

Price leadership (the syllabus model)

In price leadership, one firm (the leader) fixes the price and the others (followers) accept it, without a formal agreement. It is a form of tacit (informal) collusion. Three types:

TypeWho leadsWhy others follow
Dominant firm price leadershipThe firm with a large share of the marketSmall firms are price-takers; they cannot influence price and fear a price war
Low-cost firm price leadershipThe firm with the lowest costsIt can set a price at which it maximises profit; higher-cost firms must follow or be undersold
Barometric price leadershipA firm (not necessarily the largest or cheapest) known for reading market conditions wellIts price changes act as a “barometer” of changes in demand and cost

The dominant-firm model: the small (fringe) firms behave as in perfect competition and supply where \( P = MC \) of each. The dominant firm works out its residual demand = market demand − fringe supply at each price. It sets MR (from residual demand) = its MC, chooses output, and fixes the price; the small firms sell all they wish at that price, and the dominant firm supplies the rest.

Problems of price leadership: followers may not follow (secret price cuts); the leader may misjudge followers’ costs; entry of new firms; the leader’s price may be too high for followers with higher costs (low-cost leadership), which can lead to price wars.


7. Pricing Strategies

Market theory tells you the price that maximises profit. Pricing strategies are the practical policies firms use, especially when launching a new product or when demand varies over time.

7.1 Price skimming

Set a high initial price to “skim the cream” of buyers who value the product most and are least sensitive to price; then lower the price in steps to reach more price-sensitive segments.

Suits: new, innovative or prestige products; inelastic demand at launch (early adopters); protection from quick imitation (patents, technology lead, strong brand); uncertainty about costs (it is easier to cut a price than to raise it); a need to recover development costs quickly; limited initial capacity.

Examples: new smartphone models, game consoles, new medicines under patent, first-run cinema tickets.

Risks: high margins attract competitors; a “rip-off” image; slow adoption.

7.2 Penetration pricing

Set a low initial price to penetrate the market quickly, win a large market share and build volume; prices may be raised once the product is established.

Suits: highly elastic demand; large economies of scale (unit cost falls as volume rises); strong threat of competition, so a low price discourages entry; products that need habit or network effects (subscriptions, platforms); mass-market goods.

Examples: a new FMCG brand entering with low introductory prices; telecom and streaming services entering with very low or free introductory plans.

Risks: low margins; a price war; difficulty in raising prices later; a cheap image.

7.3 Peak-load pricing

Charging a higher price when demand is at its peak and a lower price off-peak, for goods or services that are non-storable and supplied with fixed capacity. Capacity must be built for the peak, so peak users are made to pay for capacity.

Logic:

  • Off-peak, capacity is idle, so the relevant cost of serving an extra user is only the operating (running) cost: off-peak price ≈ operating marginal cost.
  • At the peak, capacity is the binding constraint, so price should cover operating cost plus the cost of capacity.
  • The result: demand is shifted from peak to off-peak, peaks are flattened, less capacity is needed, and capacity is used more evenly.

Examples: time-of-day electricity tariffs, higher telephone or data charges at busy hours (historically), dynamic airline and hotel prices in holiday seasons, surge pricing by ride-hailing apps, cinema tickets at weekends, toll and metro charges at rush hour.

7.4 Other pricing methods (for statement questions)

MethodIdea
Cost-plus (full-cost) pricingAverage cost + a fixed mark-up (Hall and Hitch’s finding)
Marginal-cost pricingPrice set at MC (efficient benchmark; used for public utilities with subsidy)
Going-rate pricingPrice at the level charged by competitors (common in oligopoly)
Psychological pricing₹99 instead of ₹100
Transfer pricingPrice at which one division of a firm sells to another
Limit pricingPrice set low enough to deter entry
Dual pricingTwo prices for the same good: a controlled price for one part of output, market price for the rest

Memory Tricks

Don’t Confuse

PairFirstSecond
Perfect vs monopolistic competition (long run)P = min LAC; no excess capacityP = LAC on falling part; excess capacity
Monopoly vs monopolistic competitionOne seller, blocked entry, long-run supernormal profitMany sellers, free entry, long-run normal profit
Chamberlin vs Joan Robinson (1933)Monopolistic competition; product differentiation, selling costsImperfect competition; also price discrimination analysis
Pigou’s 1st vs 3rd degreeEach buyer charged his maximum; all surplus takenGroups with different elasticities
Kinked demand vs price leadershipExplains rigidity of an existing priceExplains how a price is set and followed
Dominant vs barometric leaderLeads because of large shareLeads because it reads the market well; may be small
Cartel vs price leadershipFormal (explicit) collusionTacit (informal) collusion
Skimming vs penetrationHigh price, inelastic early demandLow price, elastic demand, economies of scale
Peak-load vs price discriminationPrice differs because cost of serving differs (capacity); some textbooks still list it as time-based discriminationPrice differs without cost difference

Common Mistakes


Practice

All questions below are original practice questions written in the UGC NET format. They are not previous-year questions.

Level 1: Foundation

  1. At what price does a perfectly competitive firm shut down in the short run?
  2. Who classified price discrimination into first, second and third degrees?
  3. Which pricing strategy sets a high introductory price and lowers it over time?
Answers
  1. Any price below minimum AVC (the shut-down point is P = min AVC).
  2. A. C. Pigou (The Economics of Welfare, 1920).
  3. Price skimming.

Level 2: Exam-style MCQs

Q1. (Practice) A monopolist faces \( P = 120 - 2Q \) and has a constant MC of ₹40. Its profit-maximising price is:

  • (a) ₹40
  • (b) ₹60
  • (c) ₹80
  • (d) ₹100
Answer and explanation

(c) ₹80. \( MR = 120 - 4Q = 40 \Rightarrow Q = 20 \); \( P = 120 - 40 = ₹80 \). Lerner index = (80 − 40)/80 = 0.5, so \( e = 2 \) at that point.

Q2. (Practice) A discriminating monopolist with MC = ₹20 sells in two markets with price elasticities 2 and 5. The prices in the two markets are:

  • (a) ₹40 and ₹25
  • (b) ₹25 and ₹40
  • (c) ₹20 and ₹20
  • (d) ₹40 and ₹100
Answer and explanation

(a). \( P = MC/(1 - 1/e) \): \( 20/0.5 = ₹40 \) where \( e = 2 \); \( 20/0.8 = ₹25 \) where \( e = 5 \). Higher price in the less elastic market.

Q3. (Practice) A perfectly competitive firm has \( TC = 200 + 4Q + Q^2 \) and the market price is ₹40. Its profit-maximising output and profit are:

  • (a) 18 units, ₹124
  • (b) 20 units, ₹200
  • (c) 18 units, ₹324
  • (d) 36 units, nil
Answer and explanation

(a). \( MC = 4 + 2Q = 40 \Rightarrow Q = 18 \). TR = ₹720; TC = 200 + 72 + 324 = ₹596; profit = ₹124.

Q4. (Practice) Consider the following statements about monopolistic competition:

  1. In the long run, each firm earns only normal profit.
  2. In the long run, each firm produces at the minimum point of its LAC curve.
  3. Selling costs are an important feature of this market.

Which of the statements given above is/are correct?

  • (a) 1 and 2 only
  • (b) 1 and 3 only
  • (c) 2 and 3 only
  • (d) 1, 2 and 3
Answer and explanation

(b) 1 and 3 only. The long-run tangency of AR and LAC lies on the falling part of LAC, so output is below the minimum-cost level (excess capacity).

Q5. (Practice) Which condition favours a penetration pricing strategy for a new product?

  • (a) Demand is highly inelastic and the product is protected by a patent
  • (b) Large economies of scale and highly elastic demand
  • (c) The firm wants to recover research costs quickly from early adopters
  • (d) Capacity is limited in the first year
Answer and explanation

(b). A low price expands volume, and volume lowers unit cost. The other three favour skimming.

Level 3: Assertion–reason, match and sequence

For assertion–reason questions, use these options:

  • (a) Both A and R are true, and R is the correct explanation of A
  • (b) Both A and R are true, but R is not the correct explanation of A
  • (c) A is true, but R is false
  • (d) A is false, but R is true

Q1. (Practice) Assertion (A): Under the kinked demand curve model, oligopoly prices tend to be rigid. Reason (R): Rivals follow a price cut but not a price rise, creating a gap in the MR curve within which MC can change without affecting price.

Answer and explanation

(a). The asymmetric reaction produces the kink and the MR discontinuity, which explains price rigidity.

Q2. (Practice) Assertion (A): Price discrimination is profitable even if the elasticities of demand in the two markets are equal. Reason (R): For price discrimination to be possible, it must be possible to keep the markets separate.

Answer and explanation

(d). A is false: with equal elasticities, MR = MC gives the same price in both markets, so discrimination brings no gain. R is true: separation (no resale) is one of the necessary conditions.

Q3. (Practice) Match List I with List II.

List I (Type of price leadership / model)List II (Basis)
A. Dominant firm leadershipI. The firm with the lowest cost sets a price others must accept
B. Low-cost firm leadershipII. A firm that reads changes in market conditions well signals price changes
C. Barometric leadershipIII. Small firms act as price-takers and supply at P = MC; the leader serves residual demand
D. Kinked demand curveIV. Price cuts matched, price rises ignored
  • (1) A-III, B-I, C-II, D-IV
  • (2) A-I, B-III, C-II, D-IV
  • (3) A-III, B-II, C-I, D-IV
  • (4) A-III, B-I, C-IV, D-II
Answer and explanation

(1) A-III, B-I, C-II, D-IV.

Q4. (Practice) Match List I with List II.

List I (Pricing situation)List II (Strategy)
A. Higher tariffs for electricity during evening hoursI. Penetration pricing
B. A new patented drug launched at a high price, later reducedII. Third-degree price discrimination
C. A new instant-noodle brand launched below rivals’ prices to win shareIII. Peak-load pricing
D. Lower cinema ticket prices for students on showing an IDIV. Price skimming
  • (1) A-III, B-IV, C-I, D-II
  • (2) A-II, B-IV, C-I, D-III
  • (3) A-III, B-I, C-IV, D-II
  • (4) A-IV, B-III, C-I, D-II
Answer and explanation

(1) A-III, B-IV, C-I, D-II.

Q5. (Practice) Arrange the following oligopoly and market-structure models in chronological order:

  • A. Chamberlin’s The Theory of Monopolistic Competition

  • B. Cournot’s duopoly model

  • C. Sweezy’s kinked demand curve

  • D. Bertrand’s price-competition critique

  • (1) B, D, A, C

  • (2) B, A, D, C

  • (3) D, B, A, C

  • (4) B, D, C, A

Answer and explanation

(1) B, D, A, C. Cournot 1838 → Bertrand 1883 → Chamberlin 1933 → Sweezy 1939.

Q6. (Practice) Arrange the steps a third-degree discriminating monopolist follows, in order:

  • A. Charge in each market the price read off that market’s demand curve

  • B. Derive the aggregate MR curve by summing the markets’ MR curves horizontally

  • C. Allocate output between markets so that MR in each equals MC

  • D. Find total output where aggregate MR = MC

  • (1) B, D, C, A

  • (2) D, B, C, A

  • (3) B, C, D, A

  • (4) C, B, D, A

Answer and explanation

(1) B, D, C, A.


Quick Revision Table

ItemKey fact
All marketsMR = MC, MC cutting MR from below; price from AR
Perfect competitionP = AR = MR; SR supply = MC above min AVC; shut down below min AVC
PC long runP = MC = min LAC; normal profit; efficient
MonopolyP > MR = MC; elastic range; no supply curve; DWL; Lerner \( (P - MC)/P = 1/e \)
Price discriminationPigou (1920): 1st, 2nd, 3rd degree; Joan Robinson (1933)
ConditionsMonopoly power, separable markets (no resale), different elasticities
3rd-degree equilibrium\( MR_1 = MR_2 = MC \); higher price in less elastic market
Monopolistic competitionChamberlin (1933); differentiation, selling costs; LR tangency on falling LAC; excess capacity
OligopolyInterdependence; Cournot 1838, Bertrand 1883, Stackelberg 1934, Sweezy 1939
Kinked demandCuts matched, rises ignored; MR gap; price rigidity
Price leadershipDominant firm, low-cost firm, barometric; tacit collusion
Dominant-firm modelResidual demand = market − fringe supply; MR = MC on residual
SkimmingHigh → low; inelastic early demand; patents; recover costs
PenetrationLow price; elastic demand; scale economies; deter entry
Peak-loadPeak price = operating + capacity cost; off-peak = operating cost

Key Takeaways

What’s Next

Advertisement
Advertisement